153korea 2021년 신사옥 완공

153korea 로고

153 KOREA


더 넓은,새로운 세상을 펼쳐나가는 생각하는 젊은 기업

CUSTOMER  CENTER

02-2613-6124

02-6949-6125

FAX : 02-2613-6151
E-mail :153korea@153korea.co.kr

CMC 22H-12V-CMC

HOME > 제품소개 > BLDC Motor > Nidec Small Bldc Motor > CMC 22H-12V-CMC


pdf다운로드

1. Nidec small bldc motor
CMC 22H-12V - CMC 22H-24V zoom

CMC 22H-12V - CMC 22H-24V

2. 제품사진 / PRODUCT IMAGES
3. Characteristic
  • Clockwise Rotation (CCW Optional)
  • Signal Function Available
  • Locked Rotor Protection
  • Low Inertia
  • Quiet Operation
  • Compact φ35.8 × 40mm Case
  • Power ~ 8W Class


4. Major Characteristic Parameters
Parameter Symbol Conditions Min. Nom. Max. Units
Operating Voltage VM Model 22H-12
Model 22H-24
8.0
16
12
24
15
26.4
V
V
Operating Current I RUN Model 22H-12, continuous operation
Model 22H-24, continuous operation
- - 1.2
0.8
A
A
Run Torque TRUN Model 22H-12, continuous operation
Model 22H-24, continuous operation
- - 14.7
24.8
mN・m
mN・m
Power POUT Model 22H-12, continuous operation
Model 22H-24, continuous operation
- - 6.9
10.2
W
W
No Load Speed ωNL Model 22H-12
Model 22H-24
- 5,000
5,000
- min-1
min-1
Rotor Inertia JM - - 18.5 - g・cm2
Sound Pressure NM No load, f=0 to 20 kHz, 30cm from motor - - 50 dB(A)
Operating Temperature TA Relative humidity 5% - 90%, non-condensing 10 - 50
Life Expectancy† L10 Continuous operation, no load, TA=+20℃ 5,000 - - hours
Mass WM - - 145 - g
  • Note: Current, power, speed, sound level, and life expectancy ratings are at nominal voltage.
    *Automatic shutdown at locked rotor condition: Restart at power OFF/ON.
    †L10 bearing life expectancy, relative humidity 5% - 90%, non-condensing: The point in time at
    which 90 percent of a sample lot can be expected to survive. Failure criteria for life testing that
    establishes this figure include a 20% reduction in speed or a 20% increase in operating current..


5. Performance Characteristics
  • Continuous Operation: All time (A)
  • Quasi continuous Operation :≦30 minutes(B)/≦10 minutes(C)



6. モータ、回路構成オプショMotor and Drive Circuit Options
Feature 22H Standard 22H Options
Direction of Rotation CW CCW(also see rotational direction control option below)
Shape of Motor Shaft Round -
Surface of Motor Shaft Smooth -
Length of Motor Shaft 23.2mm -
Diameter of Motor Shaft 4.0mm -
Bearing Type Sleeve Ball


7. インターフェース
標準 OPTION Input / Output
1 VM - Power Supply 24V or 12V
2 GND - Power Return Ground
3 CW / CCW - Direction Change Low < 0.8V : CCW High > 2V : CW
4 FG - Tachometer1 Tachometer 6pulses / round
5 PWM ST / SP Start / Stop Input Low < 0.8V : run High > 2V : stop
- PWM Input Low < 0.8V : on High > 2V : off
6 BREAK - Low < 0.8V : break High > 2V : run
  • Recommended PWM frequency: 20 - 25 KHz
  • Recommended PWM Duty range: 20 - 100%
  • (1)Direction of rotation : As seen from the motor shaft.
  • (2)Please contact our Sales Dept. for any 4-pin PWM option.
  • (3)Please contact our Sales Dept. for any customized specification not described above


8.External Dimensions


※ 관련있는 제품들

제품구동 동영상 보기

153모터 스마트스토어가기