153korea 2021년 신사옥 완공

153korea 로고

153 KOREA


더 넓은,새로운 세상을 펼쳐나가는 생각하는 젊은 기업

CUSTOMER  CENTER

02-2613-6124

02-6949-6125

FAX : 02-2613-6151
E-mail :153korea@153korea.co.kr

CMC 27H-24V

HOME > 제품소개 > BLDC Motor > Nidec Small Bldc Motor > CMC 27H-24V


pdf다운로드

1. Nidec small bldc motor
CMC 27H-24V zoom

CMC 27H-24V

2. 제품사진 / PRODUCT IMAGES
3. Characteristic
  • Clockwise Rotation / Counter Clockwise Rotation
  • Signal Function Available
  • Locked Rotor Protection
  • PWM Control (Standard)
  • PLL Control (External Reference Clock、semi-customized)
  • Quiet Operation
  • Compact φ 48.9 × 31.7mm Case
  • Power ~ 12W Class


4. Major Characteristic Parameters
Parameter Symbol Conditions Min. Nom. Max. Units
Operating Voltage VM Model 27H-24 21.6 24 26.4 V
Operating Current IRun Model 27H-24, continuous operation - - 1.0 A
Run Torque TRun Model 27H-24, continuous operation - - 38 mN・m
Power POUT Model 27H-24, continuous operation - - 15.3 W
No Load Speed ωNL Model 27H-24 - 4,700 - min-1
Rotor Inertia JM - - 40 - g・cm2
Sound Pressure NM No load, f=0 to 20 kHz,30cm from motor - - 50 dB(A)
Operating Temperature TA MRelative humidity 5%-90%,non-condensing 10 - 50
Life Expectancy† L10 Continuous operation, no load,TA=+20℃ 5,000 - - hours
Mass WM - - 210 - g
  • Note: Current, power, speed, sound level, and life expectancy ratings are at nominal voltage.
    *Automatic shutdown at locked rotor condition: Restart at power OFF/ON.
    †L10 bearing life expectancy, relative humidity 5% - 90%, non-condensing: The point in time at
    which 90 percent of a sample lot can be expected to survive. Failure criteria for life testing that
    establishes this figure include a 20% reduction in speed or a 20% increase in operating current.


5. Interface
  • PWMタイプ(標準) PWM Type(Standard)
    Connector type = S7B-ZR-SM4A(JST made)
Pin No. Type Explanation
1 20FG Open-collector circuit, Ic = 3.0mA,□
square wave pulses 20ppr
2 5V IC Power Supply
3 CW/CCW High = CW/Low = CCW.
4 PWM fin = 0.5k to 50 kHz, Vin(LOW)<1.0V, □
Vin(High) = 2.5 to5.0V, duty cycle = 20% to 100%.
5 ST/ST High = Start / Low = Stop
6 GND Ground.
7 VM Motor Power Supply
  • PLLタイプ(セミカスタム)PLL Type(semi-customized)
    Connector type = S8B-ZR-SM4A (JST made)
Pin No. Type Explanation
1 GAIN High = High speed /
Low = Low speed.
2 LD SPEED LOCK : Low
3 CW/CCW High = CW / Low = CCW.
4 CLK fCLK = r.p.m. / 60 × 20.
5 ST/ST High = Stop / Low = Start.
6 5V IC Power Supply
7 GND Ground.
8 VM Motor Power Supply


6. Performance Characteristics
  • Continuous Operation:All time (A)
  • Quasi continuous Operation :≦30 minutes(B)/≦10 minutes(C)



7. Motor and Drive Circuit Options
Feature 27H Standard 27H Options
Shape of Motor Shaft Round -
Surface of Motor Shaft Smooth -
Length of Motor Shaft 14.5mm -
Bearing Type Sleeve -


8. Control Option
  • This product is semi-customized product since speed control circuit is built in motor. Speed control circuit design will be customized to required rotation speed and load condition. Please make a contact with our sales division for more information.
  • External Dimensions


※ 관련있는 제품들

제품구동 동영상 보기

153모터 스마트스토어가기