153korea 2021년 신사옥 완공

153korea 로고

153 KOREA


더 넓은,새로운 세상을 펼쳐나가는 생각하는 젊은 기업

CUSTOMER  CENTER

02-2613-6124

02-6949-6125

FAX : 02-2613-6151
E-mail :153korea@153korea.co.kr

1. NTGM102ZH1
NTGM102ZH1 zoom
NTGM102ZH1
2. 제품사진 / PRODUCT IMAGES
waterpump NTGM102ZH1 waterpump NTGM102ZH1 waterpump NTGM102ZH1 waterpump NTGM102ZH1
waterpump NTGM102ZH1 waterpump NTGM102ZH1 waterpump NTGM102ZH1 waterpump NTGM102ZH1
waterpump NTGM102ZH1 waterpump NTGM102ZH1

3. DIMENSIONS

NTGM102ZH1 DIMENSIONS


4. MEASUREMENT OF FLOW QUANTITY

NTGM102ZH1 Measurement of flow quantity

  • 1)The inclination of the pump is within 5o
  • 2)Water is used to measure after having been left more than 30min in 20±5oC
  • 3)The pump starts at DC12V, and the measurement starts within 5sec after the pump turning on the water from the exit side, the flowing quantity of 30sec is measured, and the value is converted into the fiowing quantity of 1min

5. MEASUREMENT OF SUNCTION HEIGHT

NTGM102ZH1 Measurement of Sunction height

  • 1)The inclination of the pump is within 5o
  • 2)Water is used to measure after having been left more than 30min in 20±5oC
  • 3)The pump starts at DC12V, and the measurement starts within 5sec. the water sucking up from the surface of the water is measured. (with fully dried inside the pump)

6. MEASUREMENT OF PUMPING UP HEIGHT

NTGM102ZH1 Measurement of Pumping up height

  • 1)The inclination of the pump is within 5o
  • 2)Water is used to measure after having been left more than 30min in 20±5oC
  • 3)The pump starts at DC12V, and pumps up the water. then upper height of the water is measured.

7. MEASUREMENT OF NOISE

NTGM102ZH1 Measurement of noise

  • 1)The inclination of the pump is within 5o
  • 2)Water is used to measure after having been left more than 30min in 20±5oC
  • 3)The pump starts at DC12V, and microphone placed 150mm from the pump with the water fills in the hose to measure.
  • 4)No crease on the bending part of the hose.

8. SPECIFICATIONS
ITEM PERFROMANCE NOTE
Voltage for use DC 9~13V The voltage of the operation check is DC 12V
Flow quantity 1.31±0.25/min Refer to the Fig.1.
Sucking up height 140mm or more Measured with fully dried pump.
Refer to the Fig.2 for the installation
position of the pump unit.
Pump up height 500mm or more Refer to the Fig.3 for the installation position of the pump unit.
Noise 65dB or less Measured at 150mm from the pump by the motor positive rotation.
Refer to the Fig.4. (Range A)

9. PERFROMANCE
ITEM PERFROMANCE NOISE
Motor current input No load 150mA or less
Rated load 250mA or less
Restriction 700mA or less
Motor case surface
temperature
80oC or less Measured with the rated voltage and rated load after stability of termperature
Surface temperature
rise of motor case
50K or less Measured the surface of the motor after the pump gear being
locked and energized for 2min.
Motor insulation
resistance
1MΩ or more(Motor) Between the live part and not live metal part
:DC 100V
Motor dielectric
strength
AC 100V 1min (Motor) Between the live part and not live metal part
Cut off current:5mA
Motor Insulation class Class A
Wire pull strength The wires are not come off or broken after loaded 19.6N to the lead wires
in A,B,C,D AND E directions for 10sec.
Wire pull directions
NTGM102ZH1

10. SPECIFICATIONS
ITEM TEST CONDITION
High temperature test After left to an atmosphere with ambient temperature of 60±2oC
for 168h and replaced in the normal temperature and humidity for 1h.
Low temperature test After left to an atmosphere with ambient temperature of -30±2oC
for 168h and replaced in the normal temperature and humidity for 1h.
Humidity test After left to an atmosphere with ambient temperature of 40±2oC and
95±5% for 168h and replaced in the normal temperature and humidity for 1h.
Heat cycle test 1 cycle is -30±2oC for 2h, 60±2oC for 2h and then replaces
in the normal temperature and humidity for 1h.
Drop test Withstands the shock of the drop with acceleration of 490m/s2 for 1 time
in each direction of X, and Z.
Vibration test Withstands the viberation of 3mm double amplitude 8 to 35 Hz
(sweep time is 1min) for 20min in each direction X,Y and Z.

제품구동 동영상 보기

153모터 스마트스토어가기